EPALINE 785 A 15 15 M FSM

EPALINE 785 A 15 15 M FSM is a polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, high crystallisation rate, matt surface and superior resistance to hydrolysis and microbial attack
We recommend using EPALINE 785 A 15 15 M FSM in extrusion processes, such as production of profiles, hoses, tubes and 3D filaments. It can also be used for injection molding.
EPALINE 785 A 15 15 M FSM is generally suitable for food contact application and has been approved for use in contact with drinkable water, according to NSF 61. Please contact us for detailed info on this topic.

Property	Norm	Value	Unit
Density	ASTM D 792	1.11	g/cm³
Hardness (5 sec.)	ASTM D 2240	1.11	Shore A
Hardness (5 sec.)	ASTM D 2240	86	Shore D
Tensile stress at 50% elongation	ASTM D 412	5.8	psi psi
Tensile stress at 100% elongation	ASTM D 412	6.8	psi psi
Tensile stress at 300% elongation	ASTM D 412	10.3	psi psi
Tensile strength	ASTM D 412	38	psi psi
Elongation @ break	ASTM D 412	620	% %
Tear strength	ASTM D 624	80	pli pli
Abrasion	ISO 4649	45	mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPALINE 785 A 15 15 M FSM is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 160 - 180°F in a desiccant dryer.