EPALINE 785 A 15 30

EPALINE 785 A 15 30 is a polyether based thermoplastic polyurethane, with excellent physical and mechanical properties, good transparency, high crystallisation rate and superior resistance to hydrolysis and microbial attack
We recommend using EPALINE 785 A 15 30 in extrusion processes, such as production of hoses, flexible tubes and tubes. It can also be used for injection molding.

Property	Norm	Value	Unit
Density	ASTM D 792	1.11	g/cm³
Hardness (5 sec.)	ASTM D 2240	85	Shore A
Tensile stress at 50% elongation	ASTM D 412	4.7	psi psi
Tensile stress at 100% elongation	ASTM D 412	5.8	psi psi
Tensile stress at 300% elongation	ASTM D 412	9.5	psi psi
Tensile strength	ASTM D 412	36	psi psi
Elongation @ break	ASTM D 412	550	% %
Tear strength	ASTM D 624	90	pli pli
Abrasion	ISO 4649	30	mm³

Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.

Material preparation

EPALINE 785 A 15 30 is hygroscopic and therefore has to be dried before use. The recommended drying conditions are 2-3 hours at 160 - 180°F in a desiccant dryer.