We recommend using EPALINE 395 A 55 25 in extrusion processes, such as production of profiles, hoses and tubes. It can also be used for injection molding.
| Property | Norm | Value | Unit |
|---|---|---|---|
| Density | ASTM D 792 | 1,20 | g/cm³ |
| Hardness (5 sec.) | ASTM D 2240 | 94 | Shore A |
| Tensile stress at 50% elongation | ASTM D 412 | 10,0 100 | psi psi |
| Tensile stress at 100% elongation | ASTM D 412 | 11,0 100 | psi psi |
| Tensile stress at 300% elongation | ASTM D 412 | 26,9 100 | psi psi |
| Tensile strength | ASTM D 412 | 50 100 | psi psi |
| Elongation @ break | ASTM D 412 | 450 100 | % % |
| Tear strength | ASTM D 624 | 130 100 | pli pli |
| Abrasion | ISO 4649 | 25 | mm³ |
| MFI rate 210°C / 5 kg | ASTM D1238 | 20 | g/10min |
Values shown are based on testing of laboratory test specimens, conditioned at 70°C for 14 hours, and represent data that fall within the standard range of properties for the natural material. They are not intended for use in establishing maxiumum, minimum or range of values for specification purpose.